Shopping Cart
Remove All
  • TargetMol
    Your shopping cart is currently empty

AS601245

Copy Product Info
🥰Excellent
Catalog No. T2343Cas No. 345987-15-7

AS601245 is an inhibitor of the c-Jun NH2-terminal kinase (JNK), with neuroprotective properties.

AS601245

AS601245

Copy Product Info
🥰Excellent
Purity: 99.02%
Catalog No. T2343Cas No. 345987-15-7
AS601245 is an inhibitor of the c-Jun NH2-terminal kinase (JNK), with neuroprotective properties.
Pack SizePriceUSA WarehouseGlobal WarehouseQuantity
1 mg$41In StockIn Stock
5 mg$97In StockIn Stock
10 mg$172In StockIn Stock
25 mg$288In StockIn Stock
50 mg$428In Stock-
100 mg$637In Stock-
1 mL x 10 mM (in DMSO)$107In StockIn Stock
Add to Cart
Add to Quotation
In Stock Estimated shipping dateUSA Warehouse[1-2 days] Global Warehouse[5-7 days]
All TargetMol products are for research purposes only and cannot be used for human consumption. We do not provide products or services to individuals. Please comply with the intended use and do not use TargetMol products for any other purpose.
Questions
TargetMol
View More

Batch Information

Select Batch
Purity:99.02%
Color:White
Contact us for more batch information

Resource Download

Product Introduction

Bioactivity
Description
AS601245 is an inhibitor of the c-Jun NH2-terminal kinase (JNK), with neuroprotective properties.
Targets&IC50
JNK3 (human):70 nM, JNK1 (human):150nM, JNK2 (human):220nM
Kinase Assay
FLT3 phosphorylation: Leukemia cells are washed in phosphate-buffered saline (PBS), then lysed by resuspending the cells in lysis buffer (20 mM Tris pH 7.4, 100 mM NaCl, 1% Igepal, 1 mM EDTA, 2 mM NaVO4, plus Complete protease inhibitor KW-2449 for 30 minutes while rocking. The extract is clarified by centrifugation at 1.6 × 104?g and the supernatant is assayed for protein (Bio-Rad). A 50-μg aliquot is removed as a whole-cell lysate for analysis of STAT5, and the remainder is used for immunoprecipitation with anti-FLT3. Anti-FLT3 antibody is added to the extract for overnight incubation, then protein A sepharose is added for 2 additional hours. Separate sodium dodecyl sulfate–polyacrylamide electrophoresis (SDS-PAGE) gels for whole-cell lysate and immunoprecipates are run in parallel. After transfer to Immobilon membranes, immunoblotting is performed with antiphosphotyrosine antibody (4 g10) to detect phosphorylated FLT3 or, for the whole-cell lysate gels, with a rat monoclonal antibody against phosphorylated STAT5 (residue Y694) then stripped and reprobed with anti-FLT3 antibody to measure total FLT3. Proteins are visualized using chemiluminescence, exposed on Kodak BioMax XAR film, developed, and scanned using a Bio-Rad GS800 densitometer. The concentration of KW-2449 for which the phosphorylation of FLT3 or STAT5 is inhibited to 50% of its baseline (IC50) is determined using linear regression analysis of the dose response curves. For direct analysis of FLT3 and STAT5 in circulating blasts, peripheral blood is collected in heparinized tubes and promptly chilled on ice. Samples are centrifuged for 10 minutes at 900 g, at 4 °C. The plasma is removed and stored frozen at ?80 °C. The buffy coat is carefully transferred to ice-cold PBS, layered onto chilled Ficoll-Hypaque, and centrifuged for 5 minutes at 600 g, at 4 °C. All subsequent steps are carried out at 4 °C. Mononuclear cells are collected and washed rapidly once in red blood cell lysis buffer (0.155 M NH4Cl, 0.01 M KHCO3, 0.1 mM EDTA), then washed once in PBS. Cells are then lysed as described for FLT3 and STAT5 analysis.
Chemical Properties
Molecular Weight372.45
FormulaC20H16N6S
Cas No.345987-15-7
SmilesN#CC(c1nc2ccccc2s1)c1ccnc(NCCc2cccnc2)n1
Relative Density.1.366 g/cm3 (Predicted)
Storage & Solubility Information
StoragePowder: -20°C for 3 years | In solvent: -80°C for 1 year | Shipping with blue ice/Shipping at ambient temperature.
Solubility Information
DMSO: 50 mg/mL (134.25 mM), Sonication is recommended.
In Vivo Formulation
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 1 mg/mL (2.68 mM), Sonication is recommended.
Please add the solvents sequentially, clarifying the solution as much as possible before adding the next one. Dissolve by heating and/or sonication if necessary. Working solution is recommended to be prepared and used immediately. The formulation provided above is for reference purposes only. In vivo formulations may vary and should be modified based on specific experimental conditions.
Solution Preparation Table
DMSO
1mg5mg10mg50mg
1 mM2.6849 mL13.4246 mL26.8492 mL134.2462 mL
5 mM0.5370 mL2.6849 mL5.3698 mL26.8492 mL
10 mM0.2685 mL1.3425 mL2.6849 mL13.4246 mL
20 mM0.1342 mL0.6712 mL1.3425 mL6.7123 mL
50 mM0.0537 mL0.2685 mL0.5370 mL2.6849 mL
100 mM0.0268 mL0.1342 mL0.2685 mL1.3425 mL

Calculator

  • Molarity Calculator
  • Dilution Calculator
  • Reconstitution Calculator
  • Molecular Weight Calculator

In Vivo Formulation Calculator (Clear solution)

Please enter your animal experiment information in the following box and click Calculate to obtain the stock solution preparation method and in vivo formula preparation method:
TargetMol | Animal experiments For example, if the intended dosage is 10 mg/kg for animals weighing 20 g , with a dosing volume of 100 μL per animal, TargetMol | Animal experiments and a total of 10 animals are to be administered, using a formulation of TargetMol | reagent 10% DMSO+ 40% PEG300+ 5% Tween 80+ 45% Saline/PBS/ddH2O , the resulting working solution concentration would be 2 mg/mL.
Stock Solution Preparation:

Dissolve 2 mg of the compound in 100 μL DMSOTargetMol | reagent to obtain a stock solution at a concentration of 20 mg/mL . If the required concentration exceeds the compound's known solubility, please contact us for technical support before proceeding.

Preparation of the In Vivo Formulation:

1) Add 100 μL of the DMSOTargetMol | reagent stock solution to 400 μL PEG300TargetMol | reagent and mix thoroughly until the solution becomes clear.

2) Add 50 μL Tween 80 and mix well until fully clarified.

3) Add 450 μL Saline,PBS or ddH2OTargetMol | reagent and mix thoroughly until a homogeneous solution is obtained.

This example is provided solely to demonstrate the use of the In Vivo Formulation Calculator and does not constitute a recommended formulation for any specific compound. Please select an appropriate dissolution and formulation strategy based on your experimental model and route of administration.
All co-solvents required for this protocol, includingDMSO, PEG300/PEG400, Tween 80, SBE-β-CD, and Corn oil, are available for purchase on the TargetMol website.
1 Enter information below:
mg/kg
g
μL
2 Enter the in vivo formulation:
% DMSO
%
% Tween 80
% Saline/PBS/ddH2O

Dose Conversion

You can also refer to dose conversion for different animals. More Dose Conversion

Tech Support

Please see Inhibitor Handling Instructions for more frequently ask questions. Topics include: how to prepare stock solutions, how to store products, and cautions on cell-based assays & animal experiments, etc

Keywords

Related Tags: buy AS601245 | purchase AS601245 | AS601245 cost | order AS601245 | AS601245 chemical structure | AS601245 formula | AS601245 molecular weight