Shopping Cart
Remove All
  • TargetMol
    Your shopping cart is currently empty

Arborine

Copy Product Info
🥰Excellent
Catalog No. T8196Cas No. 6873-15-0
Alias Arborin

Arborine (Arborin) is a larval growth inhibitor from glycoslnis pentaphylla.

Arborine

Arborine

Copy Product Info
🥰Excellent
Purity: 99.46%
Catalog No. T8196Alias ArborinCas No. 6873-15-0
Arborine (Arborin) is a larval growth inhibitor from glycoslnis pentaphylla.
Pack SizePriceUSA WarehouseGlobal WarehouseQuantity
1 mg$31In StockIn Stock
5 mg$81In StockIn Stock
10 mg$129In StockIn Stock
25 mg$219In StockIn Stock
50 mg$326In StockIn Stock
1 mL x 10 mM (in DMSO)$118In StockIn Stock
Add to Cart
Add to Quotation
In Stock Estimated shipping dateUSA Warehouse[1-2 days] Global Warehouse[5-7 days]
All TargetMol products are for research purposes only and cannot be used for human consumption. We do not provide products or services to individuals. Please comply with the intended use and do not use TargetMol products for any other purpose.
Questions
TargetMol
View More

Batch Information

Select Batch
Purity:99.46%
Color:Yellow
Contact us for more batch information

Resource Download

Product Introduction

Arborine AI Summary
Arborine exhibits bioactivities including the inhibition of TPA-induced EBV-early antigen activation in human Raji cells at concentrations of 0.32 nM, 3.2 nM, 16 nM, and 32 nM after 48 hours, with inhibition percentages ranging from 40.4% to 100.0%. It also shows cytotoxic activity against human Raji cells at the same concentrations and duration, as measured by the trypan blue staining method, with cytotoxicity rates greater than 80.0% at most concentrations, except for a 60.0% activity observed at 32 nM..
Note: Summary generated by AI. Data source: ChEMBL
Bioactivity
Description
Arborine (Arborin) is a larval growth inhibitor from glycoslnis pentaphylla.
SynonymsArborin
Chemical Properties
Molecular Weight250.3
FormulaC16H14N2O
Cas No.6873-15-0
SmilesCn1c(Cc2ccccc2)nc(=O)c2ccccc12
Relative Density.1.0837 g/cm3 (Estimated)
Storage & Solubility Information
Storagestore at low temperature,keep away from direct sunlight | Powder: -20°C for 3 years | In solvent: -80°C for 1 year | Shipping with blue ice/Shipping at ambient temperature.
Solubility Information
DMSO: 9 mg/mL (35.96 mM), Sonication is recommended.
In Vivo Formulation
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 1 mg/mL (4 mM), Sonication is recommended.
Please add the solvents sequentially, clarifying the solution as much as possible before adding the next one. Dissolve by heating and/or sonication if necessary. Working solution is recommended to be prepared and used immediately. The formulation provided above is for reference purposes only. In vivo formulations may vary and should be modified based on specific experimental conditions.
Solution Preparation Table
DMSO
1mg5mg10mg50mg
1 mM3.9952 mL19.9760 mL39.9521 mL199.7603 mL
5 mM0.7990 mL3.9952 mL7.9904 mL39.9521 mL
10 mM0.3995 mL1.9976 mL3.9952 mL19.9760 mL
20 mM0.1998 mL0.9988 mL1.9976 mL9.9880 mL

Calculator

  • Molarity Calculator
  • Dilution Calculator
  • Reconstitution Calculator
  • Molecular Weight Calculator

In Vivo Formulation Calculator (Clear solution)

Please enter your animal experiment information in the following box and click Calculate to obtain the stock solution preparation method and in vivo formula preparation method:
TargetMol | Animal experiments For example, if the intended dosage is 10 mg/kg for animals weighing 20 g , with a dosing volume of 100 μL per animal, TargetMol | Animal experiments and a total of 10 animals are to be administered, using a formulation of TargetMol | reagent 10% DMSO+ 40% PEG300+ 5% Tween 80+ 45% Saline/PBS/ddH2O , the resulting working solution concentration would be 2 mg/mL.
Stock Solution Preparation:

Dissolve 2 mg of the compound in 100 μL DMSOTargetMol | reagent to obtain a stock solution at a concentration of 20 mg/mL . If the required concentration exceeds the compound's known solubility, please contact us for technical support before proceeding.

Preparation of the In Vivo Formulation:

1) Add 100 μL of the DMSOTargetMol | reagent stock solution to 400 μL PEG300TargetMol | reagent and mix thoroughly until the solution becomes clear.

2) Add 50 μL Tween 80 and mix well until fully clarified.

3) Add 450 μL Saline,PBS or ddH2OTargetMol | reagent and mix thoroughly until a homogeneous solution is obtained.

This example is provided solely to demonstrate the use of the In Vivo Formulation Calculator and does not constitute a recommended formulation for any specific compound. Please select an appropriate dissolution and formulation strategy based on your experimental model and route of administration.
All co-solvents required for this protocol, includingDMSO, PEG300/PEG400, Tween 80, SBE-β-CD, and Corn oil, are available for purchase on the TargetMol website.
1 Enter information below:
mg/kg
g
μL
2 Enter the in vivo formulation:
% DMSO
%
% Tween 80
% Saline/PBS/ddH2O

Dose Conversion

You can also refer to dose conversion for different animals. More Dose Conversion

Tech Support

Please see Inhibitor Handling Instructions for more frequently ask questions. Topics include: how to prepare stock solutions, how to store products, and cautions on cell-based assays & animal experiments, etc

Keywords

Related Tags: buy Arborine | purchase Arborine | Arborine cost | order Arborine | Arborine chemical structure | Arborine formula | Arborine molecular weight