Shopping Cart
Remove All
  • TargetMol
    Your shopping cart is currently empty

Vinflunine

Copy Product Info
😃Good
Catalog No. T7594Cas No. 162652-95-1

Vinflunine is a new vinca alkaloid uniquely fluorinated with the properties of mitotic-arresting and tubulin-interacting activity.

Vinflunine

Vinflunine

Copy Product Info
😃Good
Catalog No. T7594Cas No. 162652-95-1
Vinflunine is a new vinca alkaloid uniquely fluorinated with the properties of mitotic-arresting and tubulin-interacting activity.
Pack SizePriceUSA WarehouseGlobal WarehouseQuantity
25 mg$1,520InquiryInquiry
Add to Cart
Add to Quotation
In Stock Estimated shipping dateUSA Warehouse[1-2 days] Global Warehouse[5-7 days]
All TargetMol products are for research purposes only and cannot be used for human consumption. We do not provide products or services to individuals. Please comply with the intended use and do not use TargetMol products for any other purpose.
Questions
TargetMol
View More

Resource Download

Product Introduction

Bioactivity
Description
Vinflunine is a new vinca alkaloid uniquely fluorinated with the properties of mitotic-arresting and tubulin-interacting activity.
In vitro
The major effects of Vinflunine on dynamic instability are a slowing of the microtubule growth rate, an increase in growth duration, and a reduction in shortening duration. The effects of Vinflunine on the readmilling rate is examined by following [3H]GTP incorporation into MAP-rich microtubules, and the IC50 is 0.42 μM. [1] Vinflunine induced mitotic accumulation with IC50 with 18.8 nM, which decreases the centromere dynamicity by 44% and increases the time centromeres spent ina paused state by 63%. [2] Vinflunine ditartrate exhibits microtubule inhibition (purified tubulin and MTP) and cytotoxicity in L1210 cells with IC50 of (0.49 μM and 3.5 μM) and 97 nM, respectively. [3] Vinflunine induces apoptosis in neuroblastoma SK-N-SH cells through a postmitotic G1 arrest and a mitochondrial pathway in a concentration-dependent manner with an IC50 with 50 nM. sup>[4] Treatment of Vinflunine induces a rapid change in endothelial cell shape: cells retracts and assumes a rounded morphology. Mean IC50 values are 9.9 × 10-5 M × 10-5 M for fibronectin and 5.0× 10-5 M × 10-5 M for type IV collagen. A short 4 hours exposure of endothelial cells to Vinflunine at 10-8
In vivo
Intravenous treatment of mice with Vinflunine, immediately before and 2 day after Matrigel implantation, results in a dose-dependent inhibition of the bFGF-induced angiogenic response, compared with vehicle-treated animals. Inhibition of haemoglobin content is significant at 1.25, 2.5 and 5 mg/kg, with no effect at 0.63 mg/kg (P > 0.05). An ID50 value (dose which inhibits 50% of bFGF-induced neovascularisation) is calculated as 1 mg/kg. Low doses of Vinflunine reduce the number of experimental liver metastases by human LS174T colon cancer cell. A slight overall decrease in liver metastatic foci is already observed at the very low dose of 0.16 mg/kg Vinflunine, although maximal overall inhibition is reached at the maximal tolerated dose (MTD) of 20 mg/kg. [5]
Kinase Assay
Determination of Microtubule Polymer Mass: Purified tubulin (17 μM) is polymerized into microtubules in the abence or presence of a range of vnflunine concentrations (35 minutes; 37 °C) in 75 mM PIPES, 1.8 mM MgCl2, 1.0 mM EGTA, and 1.5 mM GTP (pH 6.8) using sea urchin (Strongylocentrotus purpuratus) axonemes as seeds for assembly initiation. After incubation, polymerized microtubules are separated from unpolymerized tubulin by centrifugation (150,000 × g; 1 hour; 35 °C). The supernatant is aspirated, the sedimented microtubules are depolymerized in assembly buffer by incubation on ice (2 hours), and the protein content is determined.
Cell Research
Effects of Vinflunine on L1210 cell proliferation are determined using a standard growth inhibition assay. Exponentially growing L1210 cells (1.5 × 105 cells/well) in a 24-well plate are exposed to a range of concentrations of test compounds for 48 hours, prior to determining cell numbers using an electronic particle counter based on linear interpolation between data points.(Only for Reference)
Chemical Properties
Molecular Weight816.93
FormulaC45H54F2N4O8
Cas No.162652-95-1
SmilesC(C)[C@@]12[C@]3([C@@]4([C@]([C@](C(OC)=O)(O)[C@@H]1OC(C)=O)(N(C)C=5C4=CC(=C(OC)C5)[C@]6(C(OC)=O)C7=C(C=8C(N7)=CC=CC8)C[N@@]9C[C@](C6)(C[C@@H](C(C)(F)F)C9)[H])[H])CCN3CC=C2)[H]
Relative Density.1.39 g/cm3 (Predicted)
Storage & Solubility Information
StoragePowder: -20°C for 3 years | In solvent: -80°C for 1 year | Shipping with blue ice/Shipping at ambient temperature.
Solubility Information
DMSO: Soluble

Calculator

  • Molarity Calculator
  • Dilution Calculator
  • Reconstitution Calculator
  • Molecular Weight Calculator

In Vivo Formulation Calculator (Clear solution)

Please enter your animal experiment information in the following box and click Calculate to obtain the stock solution preparation method and in vivo formula preparation method:
TargetMol | Animal experiments For example, if the intended dosage is 10 mg/kg for animals weighing 20 g , with a dosing volume of 100 μL per animal, TargetMol | Animal experiments and a total of 10 animals are to be administered, using a formulation of TargetMol | reagent 10% DMSO+ 40% PEG300+ 5% Tween 80+ 45% Saline/PBS/ddH2O , the resulting working solution concentration would be 2 mg/mL.
Stock Solution Preparation:

Dissolve 2 mg of the compound in 100 μL DMSOTargetMol | reagent to obtain a stock solution at a concentration of 20 mg/mL . If the required concentration exceeds the compound's known solubility, please contact us for technical support before proceeding.

Preparation of the In Vivo Formulation:

1) Add 100 μL of the DMSOTargetMol | reagent stock solution to 400 μL PEG300TargetMol | reagent and mix thoroughly until the solution becomes clear.

2) Add 50 μL Tween 80 and mix well until fully clarified.

3) Add 450 μL Saline,PBS or ddH2OTargetMol | reagent and mix thoroughly until a homogeneous solution is obtained.

This example is provided solely to demonstrate the use of the In Vivo Formulation Calculator and does not constitute a recommended formulation for any specific compound. Please select an appropriate dissolution and formulation strategy based on your experimental model and route of administration.
All co-solvents required for this protocol, includingDMSO, PEG300/PEG400, Tween 80, SBE-β-CD, and Corn oil, are available for purchase on the TargetMol website.
1 Enter information below:
mg/kg
g
μL
2 Enter the in vivo formulation:
% DMSO
%
% Tween 80
% Saline/PBS/ddH2O

Dose Conversion

You can also refer to dose conversion for different animals. More Dose Conversion

Tech Support

Please see Inhibitor Handling Instructions for more frequently ask questions. Topics include: how to prepare stock solutions, how to store products, and cautions on cell-based assays & animal experiments, etc

Keywords

Related Tags: buy Vinflunine | purchase Vinflunine | Vinflunine cost | order Vinflunine | Vinflunine chemical structure | Vinflunine in vivo | Vinflunine in vitro | Vinflunine formula | Vinflunine molecular weight