Shopping Cart
Remove All
  • TargetMol
    Your shopping cart is currently empty

6''-O-Malonylgenistin

Copy Product Info
😃Good
Catalog No. TN1322Cas No. 51011-05-3

6''-O-Malonylgenistin possesses a hepatoprotective activity.

6''-O-Malonylgenistin

6''-O-Malonylgenistin

Copy Product Info
😃Good
Catalog No. TN1322Cas No. 51011-05-3
6''-O-Malonylgenistin possesses a hepatoprotective activity.
Pack SizePriceUSA WarehouseGlobal WarehouseQuantity
1 mg$198-In Stock
5 mg$492-In Stock
Add to Cart
Add to Quotation
In Stock Estimated shipping dateUSA Warehouse[1-2 days] Global Warehouse[5-7 days]
All TargetMol products are for research purposes only and cannot be used for human consumption. We do not provide products or services to individuals. Please comply with the intended use and do not use TargetMol products for any other purpose.
Questions
TargetMol
View More

Batch Information

Select Batch
Appearance:Solid
Color:Yellow
Contact us for more batch information

Resource Download

Product Introduction

Bioactivity
Description
6''-O-Malonylgenistin possesses a hepatoprotective activity.
In vitro
The isoflavone concentration in soybean samples was analyzed on a C 18 reverse-phase column using a two-step gradient solvent system. Producing soybean hydrolysate led to a nearly 40% loss of isoflavones compared with the original soybean flour, but the isoflavone composition did not change and the dominant isoflavone chemicals remained as 6''-O-Malonylgenistin and 6''-O-malonyldaidzin. Ion exchange chromatography affected significantly both the content and the composition of the isoflavones. The dominant isoflavones in the ion-exchanged fraction were aglycones and nonacylated isoflavones, accounting for 95.8% of the total amount of 987.7 microg/g. It was calculated that the isoflavone content in the soybean ACE inhibitory peptide fraction was 25 times less than the minimal effective isoflavone dose reported. In vitro study also showed that adding isoflavones into both soybean flour hydrolysate and soybean ACE inhibitory peptide samples to a concentration of as high as 31.5% (w/w) did not affect ACE inhibitory activity (IC 50 values)[1]
Chemical Properties
Molecular Weight518.42
FormulaC24H22O13
Cas No.51011-05-3
SmilesO[C@@H]1[C@@H](COC(=O)CC(O)=O)O[C@@H](Oc2cc(O)c3c(c2)occ(-c2ccc(O)cc2)c3=O)[C@H](O)[C@H]1O
Relative Density.1.654 g/cm3 (Predicted)
Storage & Solubility Information
Storagekeep away from direct sunlight,keep away from moisture,store at low temperature | Powder: -20°C for 3 years | In solvent: -80°C for 1 year | Shipping with blue ice/Shipping at ambient temperature.
Solubility Information
DMSO: 10 mM, Sonication is recommended.
In Vivo Formulation
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 1 mg/mL (1.93 mM), Sonication is recommended.
Please add the solvents sequentially, clarifying the solution as much as possible before adding the next one. Dissolve by heating and/or sonication if necessary. Working solution is recommended to be prepared and used immediately. The formulation provided above is for reference purposes only. In vivo formulations may vary and should be modified based on specific experimental conditions.
Solution Preparation Table
DMSO
1mg5mg10mg50mg
1 mM1.9289 mL9.6447 mL19.2894 mL96.4469 mL
5 mM0.3858 mL1.9289 mL3.8579 mL19.2894 mL
10 mM0.1929 mL0.9645 mL1.9289 mL9.6447 mL

Calculator

  • Molarity Calculator
  • Dilution Calculator
  • Reconstitution Calculator
  • Molecular Weight Calculator

In Vivo Formulation Calculator (Clear solution)

Please enter your animal experiment information in the following box and click Calculate to obtain the stock solution preparation method and in vivo formula preparation method:
TargetMol | Animal experiments For example, if the intended dosage is 10 mg/kg for animals weighing 20 g , with a dosing volume of 100 μL per animal, TargetMol | Animal experiments and a total of 10 animals are to be administered, using a formulation of TargetMol | reagent 10% DMSO+ 40% PEG300+ 5% Tween 80+ 45% Saline/PBS/ddH2O , the resulting working solution concentration would be 2 mg/mL.
Stock Solution Preparation:

Dissolve 2 mg of the compound in 100 μL DMSOTargetMol | reagent to obtain a stock solution at a concentration of 20 mg/mL . If the required concentration exceeds the compound's known solubility, please contact us for technical support before proceeding.

Preparation of the In Vivo Formulation:

1) Add 100 μL of the DMSOTargetMol | reagent stock solution to 400 μL PEG300TargetMol | reagent and mix thoroughly until the solution becomes clear.

2) Add 50 μL Tween 80 and mix well until fully clarified.

3) Add 450 μL Saline,PBS or ddH2OTargetMol | reagent and mix thoroughly until a homogeneous solution is obtained.

This example is provided solely to demonstrate the use of the In Vivo Formulation Calculator and does not constitute a recommended formulation for any specific compound. Please select an appropriate dissolution and formulation strategy based on your experimental model and route of administration.
All co-solvents required for this protocol, includingDMSO, PEG300/PEG400, Tween 80, SBE-β-CD, and Corn oil, are available for purchase on the TargetMol website.
1 Enter information below:
mg/kg
g
μL
2 Enter the in vivo formulation:
% DMSO
%
% Tween 80
% Saline/PBS/ddH2O

Dose Conversion

You can also refer to dose conversion for different animals. More Dose Conversion

Tech Support

Please see Inhibitor Handling Instructions for more frequently ask questions. Topics include: how to prepare stock solutions, how to store products, and cautions on cell-based assays & animal experiments, etc

Keywords

Related Tags: buy 6''-O-Malonylgenistin | purchase 6''-O-Malonylgenistin | 6''-O-Malonylgenistin cost | order 6''-O-Malonylgenistin | 6''-O-Malonylgenistin chemical structure | 6''-O-Malonylgenistin in vitro | 6''-O-Malonylgenistin formula | 6''-O-Malonylgenistin molecular weight