Shopping Cart
Remove All
  • TargetMol
    Your shopping cart is currently empty

Flumorph

Copy Product Info
😃Good
Catalog No. TQ0178Cas No. 211867-47-9
Alias SYP-L190

Flumorph (SYP-L190) (SYP-L190) is a carboxylic acid amide fungicide.

Flumorph

Flumorph

Copy Product Info
😃Good
Purity: 99.04%
Catalog No. TQ0178Alias SYP-L190Cas No. 211867-47-9
Flumorph (SYP-L190) (SYP-L190) is a carboxylic acid amide fungicide.
Pack SizePriceUSA WarehouseGlobal WarehouseQuantity
5 mg$31In StockIn Stock
10 mg$51In StockIn Stock
25 mg$100In StockIn Stock
50 mg$147In StockIn Stock
100 mg$217In StockIn Stock
200 mg$323-In Stock
1 mL x 10 mM (in DMSO)$40In StockIn Stock
Add to Cart
Add to Quotation
In Stock Estimated shipping dateUSA Warehouse[1-2 days] Global Warehouse[5-7 days]
All TargetMol products are for research purposes only and cannot be used for human consumption. We do not provide products or services to individuals. Please comply with the intended use and do not use TargetMol products for any other purpose.
Questions
TargetMol
View More

Batch Information

Select Batch
Purity:99.04%
Appearance:Solid
Color:White
Contact us for more batch information

Resource Download

Product Introduction

Bioactivity
Description
Flumorph (SYP-L190) (SYP-L190) is a carboxylic acid amide fungicide.
In vitro
Flumorph did not inhibit the synthesis of cell wall materials but disturbed the polar deposition of newly synthesized cell wall materials during cystospore germination and hyphal growth. In flumorph-treated hyphae, the most characteristic change was the development of periodic swelling ('beaded' morphology) and the disruption of tip growth. Upon removing flumorph, normal tip growth and organized F-actin have observed again [1]. Flumorph had induced systemic genotoxicity in mammals as it caused DNA damage in all tested vital organs, especially in the brain and spleen [2].
SynonymsSYP-L190
Chemical Properties
Molecular Weight371.4
FormulaC21H22FNO4
Cas No.211867-47-9
SmilesCOc1ccc(cc1OC)C(=C\C(=O)N1CCOCC1)\c1ccc(F)cc1
Relative Density.1.208 g/cm3
Storage & Solubility Information
StoragePowder: -20°C for 3 years | In solvent: -80°C for 1 year | Shipping with blue ice/Shipping at ambient temperature.
Solubility Information
DMSO: 25 mg/mL (67.31 mM), Sonication is recommended.
In Vivo Formulation
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 2 mg/mL (5.39 mM), Sonication is recommended.
Please add the solvents sequentially, clarifying the solution as much as possible before adding the next one. Dissolve by heating and/or sonication if necessary. Working solution is recommended to be prepared and used immediately. The formulation provided above is for reference purposes only. In vivo formulations may vary and should be modified based on specific experimental conditions.
Solution Preparation Table
DMSO
1mg5mg10mg50mg
1 mM2.6925 mL13.4626 mL26.9251 mL134.6257 mL
5 mM0.5385 mL2.6925 mL5.3850 mL26.9251 mL
10 mM0.2693 mL1.3463 mL2.6925 mL13.4626 mL
20 mM0.1346 mL0.6731 mL1.3463 mL6.7313 mL
50 mM0.0539 mL0.2693 mL0.5385 mL2.6925 mL

Calculator

  • Molarity Calculator
  • Dilution Calculator
  • Reconstitution Calculator
  • Molecular Weight Calculator

In Vivo Formulation Calculator (Clear solution)

Please enter your animal experiment information in the following box and click Calculate to obtain the stock solution preparation method and in vivo formula preparation method:
TargetMol | Animal experiments For example, if the intended dosage is 10 mg/kg for animals weighing 20 g , with a dosing volume of 100 μL per animal, TargetMol | Animal experiments and a total of 10 animals are to be administered, using a formulation of TargetMol | reagent 10% DMSO+ 40% PEG300+ 5% Tween 80+ 45% Saline/PBS/ddH2O , the resulting working solution concentration would be 2 mg/mL.
Stock Solution Preparation:

Dissolve 2 mg of the compound in 100 μL DMSOTargetMol | reagent to obtain a stock solution at a concentration of 20 mg/mL . If the required concentration exceeds the compound's known solubility, please contact us for technical support before proceeding.

Preparation of the In Vivo Formulation:

1) Add 100 μL of the DMSOTargetMol | reagent stock solution to 400 μL PEG300TargetMol | reagent and mix thoroughly until the solution becomes clear.

2) Add 50 μL Tween 80 and mix well until fully clarified.

3) Add 450 μL Saline,PBS or ddH2OTargetMol | reagent and mix thoroughly until a homogeneous solution is obtained.

This example is provided solely to demonstrate the use of the In Vivo Formulation Calculator and does not constitute a recommended formulation for any specific compound. Please select an appropriate dissolution and formulation strategy based on your experimental model and route of administration.
All co-solvents required for this protocol, includingDMSO, PEG300/PEG400, Tween 80, SBE-β-CD, and Corn oil, are available for purchase on the TargetMol website.
1 Enter information below:
mg/kg
g
μL
2 Enter the in vivo formulation:
% DMSO
%
% Tween 80
% Saline/PBS/ddH2O

Dose Conversion

You can also refer to dose conversion for different animals. More Dose Conversion

Tech Support

Please see Inhibitor Handling Instructions for more frequently ask questions. Topics include: how to prepare stock solutions, how to store products, and cautions on cell-based assays & animal experiments, etc

Keywords

Related Tags: buy Flumorph | purchase Flumorph | Flumorph cost | order Flumorph | Flumorph chemical structure | Flumorph in vitro | Flumorph formula | Flumorph molecular weight