Contact UsQuotation
Shopping Cart
Remove All
  • TargetMol
    Your shopping cart is currently empty
Proceed to checkoutContinue shopping
TOPBioactivityChemical infoStorage&SolubilityCalculator

Tubulin inhibitor 1

😃Good
Catalog No. T13227Cas No. 2237054-53-2

Tubulin inhibitor 1 is an inhibitor of tubulin, inhibits tubulin polymerization, with potent anti-tumor activity, induces cellular apoptosis causes and cellular mitotic arrest in the G2/M phase.

Tubulin inhibitor 1

Tubulin inhibitor 1

😃Good
Catalog No. T13227Cas No. 2237054-53-2
Tubulin inhibitor 1 is an inhibitor of tubulin, inhibits tubulin polymerization, with potent anti-tumor activity, induces cellular apoptosis causes and cellular mitotic arrest in the G2/M phase.
Pack SizePriceUSA WarehouseGlobal WarehouseQuantity
2 mg$465 days5 days
Add to Cart
Add to Quotation
In Stock Estimated shipping dateUSA Warehouse[1-2 days] Global Warehouse[5-7 days]
All TargetMol products are for research purposes only and cannot be used for human consumption. We do not provide products or services to individuals. Please comply with the intended use and do not use TargetMol products for any other purpose.
Questions
TargetMol
View More

Resource Download

Product Introduction

Bioactivity
Description
Tubulin inhibitor 1 is an inhibitor of tubulin, inhibits tubulin polymerization, with potent anti-tumor activity, induces cellular apoptosis causes and cellular mitotic arrest in the G2/M phase.
In vitro
Tubulin inhibitor 1 is an inhibitor of tubulin.Tubulin inhibitor 1 has potent anti-proliferative activity against SK-OV-3, MDA-MB-231, HeLa, A549, CT26 and MCF-7 cells(IC50s of 16.7 ± 3.0, 31.4 ± 0.7, 32.8 ± 2.9, 67.0 ± 0.8, 58.0 ± 2.4 and 35.4 ± 5.6 nM, respectively). Tubulin inhibitor 1 (40, 80, and 160 nM, 48 hours) markedly causes cellular mitotic arrest in the G2/M phase, induces apoptosis in SK-OV-3 cells.
In vivo
In Balb/c nude mice bearing SK-OV-3 cells, Tubulin inhibitor 1 (50 mg/kg, i.p., )treatment every two days three times for 20-25 days is well tolerated, significantly reduces tumour growth .
Chemical Properties
Molecular Weight368.43
FormulaC21H24N2O4
Cas No.2237054-53-2
Relative Density.1.14 g/cm3 (Predicted)
Storage & Solubility Information
StoragePowder: -20°C for 3 years | In solvent: -80°C for 1 year | Shipping with blue ice/Shipping at ambient temperature.
Solubility Information
DMSO: 125 mg/mL (339.28 mM), Sonication is recommended.
In Vivo Formulation
10% DMSO+40% PEG300+5% Tween-80+45% Saline: 3.3 mg/mL (8.96 mM), Sonication is recommeded.
Please add the solvents sequentially, clarifying the solution as much as possible before adding the next one. Dissolve by heating and/or sonication if necessary. Working solution is recommended to be prepared and used immediately. The formulation provided above is for reference purposes only. In vivo formulations may vary and should be modified based on specific experimental conditions.
Solution Preparation Table
DMSO
1mg5mg10mg50mg
1 mM2.7142 mL13.5711 mL27.1422 mL135.7110 mL
5 mM0.5428 mL2.7142 mL5.4284 mL27.1422 mL
10 mM0.2714 mL1.3571 mL2.7142 mL13.5711 mL
20 mM0.1357 mL0.6786 mL1.3571 mL6.7855 mL
50 mM0.0543 mL0.2714 mL0.5428 mL2.7142 mL
100 mM0.0271 mL0.1357 mL0.2714 mL1.3571 mL

Calculator

  • Molarity Calculator
  • Dilution Calculator
  • Reconstitution Calculator
  • Molecular Weight Calculator

In Vivo Formulation Calculator (Clear solution)

Please enter your animal experiment information in the following box and click Calculate to obtain the mother liquor preparation method and in vivo formula preparation method:
TargetMol | Animal experimentsFor example, your dosage is 10 mg/kg Each animal weighs 20 g, and the dosage volume is 100 μL . TargetMol | Animal experiments A total of 10 animals were administered, and the formula you used is 5% TargetMol | reagent DMSO+30% PEG300+5% Tween 80+60% Saline/PBS/ddH2O. So your working solution concentration is 2 mg/mL。
Mother liquor preparation method: 2 mg of drug dissolved in 50 μL DMSOTargetMol | reagent (mother liquor concentration of 40 mg/mL), if you need to configure a concentration that exceeds the solubility of the product, please contact us first.
Preparation method for in vivo formula: Take 50 μL DMSOTargetMol | reagent main solution, add 300 μLPEG300TargetMol | reagent mix well and clarify, then add 50 more μL Tween 80, mix well and clarify, then add 600 more μLSaline/PBS/ddH2OTargetMol | reagent mix well and clarify
For Reference Only. Please develop an appropriate dissolution method based on your laboratory animals and route of administration.
All types of co-solvents required for the protocol, such asDMSO, PEG300/ PEG400, Tween 80, SBE-β-CD, corn oil are available for purchase on the TargetMol website with a simple click.
1 Enter information below:
mg/kg
g
μL
2 Enter the in vivo formulation:
% DMSO
%
% Tween 80
% Saline/PBS/ddH2O

Dose Conversion

You can also refer to dose conversion for different animals. More Dose Conversion

Tech Support

Please see Inhibitor Handling Instructions for more frequently ask questions. Topics include: how to prepare stock solutions, how to store products, and cautions on cell-based assays & animal experiments, etc

Keywords

Tubulin inhibitor 1TubulinMicrotubuleAssociatedMicrotubule Associated
Related Tags: buy Tubulin inhibitor 1 | purchase Tubulin inhibitor 1 | Tubulin inhibitor 1 cost | order Tubulin inhibitor 1 | Tubulin inhibitor 1 chemical structure | Tubulin inhibitor 1 in vivo | Tubulin inhibitor 1 in vitro | Tubulin inhibitor 1 formula | Tubulin inhibitor 1 molecular weight
TargetMol | Logo

Copyright © 2015-2025 TargetMol Chemicals Inc. All Rights Reserved.