Shopping Cart
Remove All
  • TargetMol
    Your shopping cart is currently empty

Iso-OMPA

😃Good
Catalog No. T86746Cas No. 513-00-8
Alias Tetraisopropyl pyrophosphoramide

Iso-OMPA (Tetraisopropyl pyrophosphoramide) is a selective, covalent, and irreversible butylcholinesterase (BuChE) inhibitor for studying BuChE-related diseases.

Iso-OMPA

Iso-OMPA

😃Good
Purity: 98.66%
Catalog No. T86746Alias Tetraisopropyl pyrophosphoramideCas No. 513-00-8
Iso-OMPA (Tetraisopropyl pyrophosphoramide) is a selective, covalent, and irreversible butylcholinesterase (BuChE) inhibitor for studying BuChE-related diseases.
Pack SizePriceUSA WarehouseGlobal WarehouseQuantity
1 mg$93-In Stock
5 mg$228-In Stock
10 mg$372-In Stock
25 mg$745-In Stock
50 mg$1,180-In Stock
1 mL x 10 mM (in DMSO)$253-In Stock
Add to Cart
Add to Quotation
In Stock Estimated shipping dateUSA Warehouse[1-2 days] Global Warehouse[5-7 days]
All TargetMol products are for research purposes only and cannot be used for human consumption. We do not provide products or services to individuals. Please comply with the intended use and do not use TargetMol products for any other purpose.
Questions
TargetMol
View More

Batch Information

Select Batch
Purity:98.66%
Contact us for more batch information

Resource Download

Product Introduction

Bioactivity
Description
Iso-OMPA (Tetraisopropyl pyrophosphoramide) is a selective, covalent, and irreversible butylcholinesterase (BuChE) inhibitor for studying BuChE-related diseases.
In vitro
Iso-OMPA exhibited IC₅₀ values of 694.7 μM (brain), 10.56 μM (liver), and 9.84 μM (muscle) for propionylthiocholine iodide (PSCh) in the brain, liver, and muscle tissues of the brown shrimp Penaeus aztecus, respectively [1].
For butyrylthiocholine iodide (BSCh), Iso-OMPA showed IC₅₀ values of 12.49 μM (liver) and 11.42 μM (muscle) in the liver and muscle tissues of P. aztecus, with corresponding Ki values of 0.2019 μM (liver) and 0.6612 μM (muscle) [1].
Iso-OMPA (100 μM, treated for 30 minutes) increased the sensitivity of isolated bronchial preparations from Homo sapiens to acetylcholine [2].
In vivo
Iso-OMPA (0.6 and 1.9 mg/kg, subcutaneous injection, single dose) only slightly inhibited rat plasma cholinesterase (CarbE) activity at the low dose, while significantly inhibiting its activity at the high dose; however, no obvious inhibitory effect was observed on mouse plasma CarbE activity [3].
SynonymsTetraisopropyl pyrophosphoramide
Chemical Properties
Molecular Weight342.36
FormulaC12H32N4O3P2
Cas No.513-00-8
SmilesO=P(OP(=O)(NC(C)C)NC(C)C)(NC(C)C)NC(C)C
ColorWhite
AppearanceSolid
Storage & Solubility Information
Storagestore at low temperature | Powder: -20°C for 3 years | In solvent: -80°C for 1 year | Shipping with blue ice.
Solubility Information
DMSO: 80 mg/mL (233.67 mM), Sonication is recommended.
H2O: 8 mg/mL (23.37 mM), Sonication is recommended.
In Vivo Formulation
10% DMSO+40% PEG300+5% Tween-80+45% Saline: 3.3 mg/mL (9.64 mM), Sonication is recommeded.
Please add the solvents sequentially, clarifying the solution as much as possible before adding the next one. Dissolve by heating and/or sonication if necessary. Working solution is recommended to be prepared and used immediately. The formulation provided above is for reference purposes only. In vivo formulations may vary and should be modified based on specific experimental conditions.
Solution Preparation Table
H2O/DMSO
1mg5mg10mg50mg
1 mM2.9209 mL14.6045 mL29.2090 mL146.0451 mL
5 mM0.5842 mL2.9209 mL5.8418 mL29.2090 mL
10 mM0.2921 mL1.4605 mL2.9209 mL14.6045 mL
20 mM0.1460 mL0.7302 mL1.4605 mL7.3023 mL
DMSO
1mg5mg10mg50mg
50 mM0.0584 mL0.2921 mL0.5842 mL2.9209 mL
100 mM0.0292 mL0.1460 mL0.2921 mL1.4605 mL

Calculator

  • Molarity Calculator
  • Dilution Calculator
  • Reconstitution Calculator
  • Molecular Weight Calculator

In Vivo Formulation Calculator (Clear solution)

Please enter your animal experiment information in the following box and click Calculate to obtain the mother liquor preparation method and in vivo formula preparation method:
TargetMol | Animal experimentsFor example, your dosage is 10 mg/kg Each animal weighs 20 g, and the dosage volume is 100 μL . TargetMol | Animal experiments A total of 10 animals were administered, and the formula you used is 5% TargetMol | reagent DMSO+30% PEG300+5% Tween 80+60% Saline/PBS/ddH2O. So your working solution concentration is 2 mg/mL。
Mother liquor preparation method: 2 mg of drug dissolved in 50 μL DMSOTargetMol | reagent (mother liquor concentration of 40 mg/mL), if you need to configure a concentration that exceeds the solubility of the product, please contact us first.
Preparation method for in vivo formula: Take 50 μL DMSOTargetMol | reagent main solution, add 300 μLPEG300TargetMol | reagent mix well and clarify, then add 50 more μL Tween 80, mix well and clarify, then add 600 more μLSaline/PBS/ddH2OTargetMol | reagent mix well and clarify
For Reference Only. Please develop an appropriate dissolution method based on your laboratory animals and route of administration.
All types of co-solvents required for the protocol, such asDMSO, PEG300/ PEG400, Tween 80, SBE-β-CD, corn oil are available for purchase on the TargetMol website with a simple click.
1 Enter information below:
mg/kg
g
μL
2 Enter the in vivo formulation:
% DMSO
%
% Tween 80
% Saline/PBS/ddH2O

Dose Conversion

You can also refer to dose conversion for different animals. More Dose Conversion

Tech Support

Please see Inhibitor Handling Instructions for more frequently ask questions. Topics include: how to prepare stock solutions, how to store products, and cautions on cell-based assays & animal experiments, etc
Related Tags: buy Iso-OMPA | purchase Iso-OMPA | Iso-OMPA cost | order Iso-OMPA | Iso-OMPA chemical structure | Iso-OMPA in vivo | Iso-OMPA in vitro | Iso-OMPA formula | Iso-OMPA molecular weight