Your shopping cart is currently empty

DAF-FM DA (Diaminofluorescein-FM diacetate) is a reactive dye for the detection of nitric oxide (NO) and reactive nitrogen species (RNS) levels for bioimaging (Ex/Em=495/515 nm).

| Pack Size | Price | USA Warehouse | Global Warehouse | Quantity |
|---|---|---|---|---|
| 1 mg | $898 | 35 days | 35 days |
| Description | DAF-FM DA (Diaminofluorescein-FM diacetate) is a reactive dye for the detection of nitric oxide (NO) and reactive nitrogen species (RNS) levels for bioimaging (Ex/Em=495/515 nm). |
| In vitro | BCa cells were pre-incubated with 5 μM DAF-FM DA for 30 minutes to load the probe. The DAF-FM DA probe quantifies nitric oxide (NO) levels in cells. [1] |
| In vivo | Using zebrafish embryo sections live-stained with DAF-FM DA (5 μM), it was confirmed that the fluorescent signal was primarily localized to areas of ongoing bone formation.[2] |
| Cell Research | Instructions: I. Solution preparation 1. Preparation of mother solution: Dissolve DAF-FM DA in DMSO to prepare a 10mM mother solution for standby use. 2. Preparation of working solution: Dilute the DAF-FM DA mother solution with PBS/H2O/DMEM to prepare a working solution for standby use. The commonly used concentration is 5-10μM. II. Operation steps 1. Pre-incubate BCa cells with 5 μM DAF-FM DA for 30 minutes to load the probe. 2. Subsequently, incubate the cells with fresh Hank's buffer for 20 minutes to complete deesterification. The DAF-FM DA probe can quantify the level of nitric oxide (NO) in cells. The above information is based on published literature. Experimental procedures should be appropriately modified to meet specific research demands. |
| Synonyms | Diaminofluorescein-FM diacetate |
| Molecular Weight | 496.42 |
| Formula | C25H18F2N2O7 |
| Cas No. | 254109-22-3 |
| Smiles | O=C1OC2(C3=CC(F)=C(OC(=O)C)C=C3OC4=CC(OC(=O)C)=C(F)C=C42)C5=CC=C(NC)C(N)=C15 |
| Relative Density. | 1.56 g/cm3 (Predicted) |
| Storage | store at low temperature | In solvent: -80°C for 1 year | Shipping with blue ice/Shipping at ambient temperature. |
Dissolve 2 mg of the compound in 100 μL DMSO
to obtain a stock solution at a concentration of 20 mg/mL . If the required concentration exceeds the compound's known solubility, please contact us for technical support before proceeding.
1) Add 100 μL of the DMSO
stock solution to 400 μL PEG300
and mix thoroughly until the solution becomes clear.
2) Add 50 μL Tween 80 and mix well until fully clarified.
3) Add 450 μL Saline,PBS or ddH2O
and mix thoroughly until a homogeneous solution is obtained.
| Size | Quantity | Unit Price | Amount | Operation |
|---|

Copyright © 2015-2026 TargetMol Chemicals Inc. All Rights Reserved.